225 Matrix VISIONPRO System Manual
System Parameters
System Security (Passwords)
Time Table
Toll Control
Trunk Access Group (TAG)
Program Internal Inter Digit Wait Timer 3009-Seconds
Load default configuration 1103-Reverse SE Password
Load default values of all timers 1107-*-#
Configuring the Companding Type 1108-Code
Displaying the system’s version and revision 1110
Change SE Password 1104-Old SE Password-New SE Password
Change SA Password 1105-Old SA Password-New SA Password
Program the system in Manual/Auto mode 1051-0/1
Set Day or Night mode 1052-1/0
Program the time table 1053-Day-Start Time-End Time
Assign allowed list to a station during Day time 4501-1-Station-Allowed List
Assign allowed list to all stations during Day time 4501-*-Allowed List
Assign allowed list to a station during Night time 4502-1-Station-Allowed List
Assign allowed list to all stations during Night time 4502-*-Allowed List
Assign denied list to a station during Day time 4511-1-Station-Denied List
Assign denied list to all stations during Day time 4511-*-Denied List
Assign denied list to a station during Night time 4512-1-Station-Denied List
Assign denied list to all stations during Night time 4512-*-Denied List
Assign allowed list to a station for locked condition 4521-1-Station-Locked Allowed List
Assign allowed list to all stations for locked condition 4521-*-Locked Allowed List
Assign denied list to a station for locked condition 4522-1-Station-Locked Denied List
Assign denied list to all stations for locked condition 4522-*-Locked Denied List
Put trunk(s) in Trunk Access Group (TAG) 4402-1-Trunk Access Group-Trunk0…Trunk2/#
Put same trunk(s) in all Trunk Access Groups 4402-*-Trunk0…..Trunk2/#
Program rotation code for a group 4403-1-Trunk Access Group-Rotation Code
Program same rotation code for all the groups 4403-*-Rotation Code
Default a Trunk Access Group 4401-1-Trunk Access Group-#
Default all Trunk Access Groups 4401-*-#
To Next Page
Loading...
Need help?
General
