Matrix Visionpro System Manual

29 Matrix VISIONPRO System Manual
Year is from 00 to 99 (here, base year is '2000'. Enter '07' for year '2007')
Day is from 1 to 7 where, 1 = Sunday.
For more details, refer “Real Time Clock (RTC)”.
Set Current Time
•Dial 28-Hour-Minute
Where,
Hour is from 00 to 23.
Minute is from 00 to 59.
Time has three parameters: Hour, Minute and Second. However, the above command has only two
parameters. The third parameter, Seconds will be set as '00' whenever new time is programmed. For more
details, refer “Real Time Clock (RTC)”.
Set New SE Password
•Dial 291-New SE Password
Where,
SE Password is a 4 digit number string. Valid digits are from 0-9.
For more details, refer “System Security (SE and SA Passwords)”.
Set New SA Password
•Dial 292-New SA Password
Where,
SA Password is a 4 digit number string. Valid digits are from 0-9.
For more details, refer “System Security (SE and SA Passwords)”.
Station Parameters
Following Station Parameters can be configured using the wizard,
• Class Of Service
• Toll Control
• Clear All the Features
• Flash Timer for station
• Flexible Number
• Operator Station
Class of Service (CoS)
• To assign CoS to individual stations, dial,
31-Ext-Day CoS Group-Night CoS Group

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English