Matrix Visionpro

Matrix VISIONPRO System Manual 30
• To assign CoS to all stations, dial,
31-*-Day CoS Group-Night CoS Group
Where,
Ext is the flexible number of the station. Flexible number can be of 1,2,3 or 4 digits.
Day CoS group is from 0 to 7
Night CoS Group is from 0 to 7
For more details, refer chapter “Class of Service (CoS)”.
Example:
Assign CoS group '4' for Day time and '6' for Night time to station '23'.
Solution. Dial, 31-23-4-6
Toll Control
• To assign Toll Control to individual stations, dial,
32-Ext-Day AL/DL List-Night AL/DL List
• To assign Toll Control to all stations, dial,
32-*-Day AL/DL List-Night AL/DL List
Where,
Ext is the flexible number of the station. Flexible number can be of 1,2,3 or 4 digits.
Allowed List (AL) is from 0 to 7.
Denied List (DL) is from 0 to 7.
For details, refer “Toll Control”.
Example:
Program AL/DL List number 3 for Day time and 4 for Night time for station '25'.
Solution. Dial, 32-25-3-4
Clear All the Features
• To clear all features for a station, dial,
343-Ext
4
Where,
Ext is the flexible number of a station. Flexible number can be of 1,2,3 or 4 digits.
For more details, refer “Cancel All Station Features”.
Flash Timer for station
• To assign Flash Timer to individual stations, dial,
36-Ext-Flash Timer Count
4. This is same as dialing the command '100' from a station to cancel all its features (see “Cancel All Station Features”). But ‘100’ can
be dialed by any user from a station phone whereas command '343' can be dialed by SE only.