Matrix Visionpro System Manual

31 Matrix VISIONPRO System Manual
• To assign Flash Timer to all stations, dial,
36-*-Flash Timer Count
Where,
Ext is the flexible number of a station. Flexible number can be of 1,2,3 or 4 digits.
Flash Timer Count is from 1 to 9 where Count 1 implies to 70-100 ms.
For example, to set Flash timer value as 101-600 ms, dial Flash Timer Count as 6.
For more details, refer “Station Parameters”.
Example:
Program Flash timer of 101- 800 ms for station 25.
Solution. Dial 36-25-8
Flexible Number
• To assign Flexible Number to individual stations, dial,
37-Software Port No-Flexible Number-#*
• To load the default Flexible Numbers, dial,
37-*-0
Where,
Software Port No is from 00 to 07.
Flexible Number can be any 1,2,3 or 4 digit number strings. Terminate the command using ‘#*’ if the
flexible number consists of less than four digits. Two stations can not have the same flexible number.
For more details, refer “Flexible Numbers”.
Example:
Assign flexible number 401 to the software port number 00.
Solution. Dial 37-00-401-#*
Operator Station
• To assign a particular station as the operator, dial,
391-Ext
Flash Timer
Count
Flash Timer value
in ms
1 70-100
2 101-200
3 101-300
4 101-400
5 101-500
6 101-600
7 101-700
8 101-800
9 101-900

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English