Matrix Visionpro System Manual

59 Matrix VISIONPRO System Manual
By default, Trunk type is Normal Dial Type.
• To define the same trunk type for all trunks, dial,
3103-*-Code
Example:
Program trunk port2 for hotline dial type.
Solution. Dial, 3103-1-2-2
• To configure the Speech Connection Delay Timer for a trunk, dial,
3104-1-Trunk-Speech Timer
Where,
Trunk is the software port number from 0 to 2.
Speech Timer is from 0 to 9.
• To configure the same Speech Connection Delay Timer for all trunks, dial,
3104-*-Speech Timer
Where,
Speech Timer is from 0 to 9.
• To configure the CLI type for a trunk, dial,
3105-1-Trunk-CLI Type
Where,
Trunk is the software port from 0 to 2.
By default, CLI type is 2 on all the trunks.
• To configure the same CLI type for all the trunks, dial,
3105-*-CLI Type
• To configure the Pause Timer for a trunk, dial,
3106-1-Trunk-Code
Where,
CLI Type Meaning
00 None
01 Any ETSI DTMF format
02 Any FSK V.23 Format
03 Any FSK BELLCORE Format
04 1st ring, ETSI DTMF, 2nd ring
05 Polarity Reversal, ETSI DTMF, 1st ring
06 1st ring, FSK, 2nd ring
07 DTAS, FSK, 1st ring
08 RPAS, FSK, 1st ring
09 Polarity Reversal, DTAS, FSK, 1st ring
10 Any DTMF format (without start/stop code)

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English