Matrix Visionpro System Manual

75 Matrix VISIONPRO System Manual
Trunk Access Group is from 0 to 7.
By default, all trunks are allowed to all stations.
• To assign the same Trunk Access Group and Trunk Access Code to all the stations for Day time, dial,
4411-*-Trunk Access Group Index-Trunk Access Group
• To assign a Trunk Access Group and Trunk Access Code to a station for Night time, dial,
4412-1-Station-Trunk Access Group Index-Trunk Access Group
Where,
Station is from 00 to 07.
Trunk Access Group Index is from 0 to 5. Refer the above table to view the mapping of Trunk Access
Group Indexes to the Trunk Access Codes.
Trunk Access Group is from 0 to 7.
By default, all trunks are allowed to all stations.
• To assign the same Trunk Access Group and Trunk Access Code to all the stations for Night time, dial,
4412-*-Trunk Access Group Index-Trunk Access Group
• Exit SE mode.
Example:
Program the system to fulfil the following requirements,
• 3 trunks.
• 3 departments: Technical, Marketing and Administration.
• Technical department should get access to trunk 0 and 1 during Day time by dialing ‘0’.
• Marketing department should get access to trunk 1 and 2 during Day time by dialing ‘0’.
• Administration department should get access to all the three trunks during Day time by dialing ‘0’.
• Security station (station 28) should not get access to any trunk during Day time.
• Technical department and Marketing department should not get trunk access to any trunk during Night
time.
• Administration department should get access to trunk 1 by dialing ‘0’ during Night time.
• Station 28 (security station-software port 07) should get access to all the trunks by dialing ‘0’ during Night
time only.
• Technical department has two stations 21 and 22 (software ports 00 and 01).
• Marketing department has two stations 23 and 24 (software ports 02 and 03).
• Administration department has three stations 25, 26, 27 (software ports 04, 05, 06).
Solution: Dial the following commands in SE mode,
4402-1-0-0-1-# (to assign trunks to a Trunk Access Group)
4402-1-1-1-2-#
4402-1-2-0-1-2-#
4402-1-3-# (to configure a Trunk Access Group having no trunks at all)
4402-1-4-1-#
For Technical department during Day,
463
564
Trunk Access Group Index Trunk Access Code

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English