Maytag MDB series User Manual

4-24
n
Maytag Chopper Dishwashers
COMPONENT ACCESS
Removing the Chopper Motor Assembly
Disassemble Chopper Motor Assembly
6. Remove Pump Housing - Remove the three (3) screws
securing the pump housing to the motor assembly (see
Figure 4).
Figure 4
7. Use a screwdriver to separate the pump housing from the
motor assembly (see Figure 5).
Figure 5
8. Remove pump housing from motor assembly (see Figure
6).
Figure 6
NOTE: The pump housing is keyed to the motor assembly for
ease of reassembly.
9. Remove the Chopper Blade from the motor assembly (see
Figure 7).
Chopper
Blade
Figure 7
NOTE: The Chopper Blade is keyed to t on the center sha of
the impeller assembly.

Maytag MDB series Specifications

General

Type	Built-In
Capacity	14 Place Settings
Tub Material	Stainless Steel
Energy Star Certified	Yes
Soil Sensor	Yes
Heated Dry	Yes
Control Type	Electronic
Delay Start	Yes