Meggitt vibro-meter VM600 Quick Start Manual

Document reference MAVM600MK2MPS-QS/E QUICK START MANUAL
Edition 2 - February 2021 VM600
Mk2
machinery protection system (MPS)
2-1
VM600 racks
OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION SYSTEM (MPS) HARDWARE
2 OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION
SYSTEM (MPS) HARDWARE
This chapter provides a brief overview of the VM600
Mk2
machinery protection system (MPS)
hardware.
This includes an introduction to the features and basic functionality of the VM600
Mk2
machinery protection system (MPS) modules:
•MPC4
Mk2
+IOC4
Mk2
machinery protection and condition monitoring module
• RLC16
Mk2
relay module.
For information on the VibroSight
®
software used with the VM600
Mk2
machinery protection
system (MPS) hardware, see 3 Overview of VM600
Mk2
machinery protection system (MPS)
software.
NOTE: For further information on VM600 racks in general, refer to a VM600 machinery
protection system (MPS) hardware manual.
2.1 VM600 racks
2.1.1 VM600 system racks (ABE04x)
See 1.2 Installing a rack.
2.1.2 VM600 slimline racks (ABE056)
See 1.2 Installing a rack.

Meggitt vibro-meter VM600 Specifications

General

Brand	Meggitt
Model	vibro-meter VM600
Category	Protection Device
Language	English