Meggitt vibro-meter VM600 Quick Start Manual

QUICK START MANUAL Document reference MAVM600MK2MPS-QS/E
VM600
Mk2
machinery protection system (MPS) Edition 2 - February 2021
5-2
Repairs and returns
SERVICE AND SUPPORT
5.4 Repairs and returns
If a Meggitt vibro-meter
®
Energy product needs to be returned to Meggitt Switzerland, please
use the online Energy product return procedure on the Meggitt vibro-meter
®
Energy website
at: www.meggittsensing.com/energy/service-and-support/repair
NOTE: For further information, refer to a VM600 machinery protection system (MPS)
hardware manual or contact us (see 5.1 Contacting us).
5.5 End-of-life product disposal
VM600
Mk2
/VM600 machinery protection system (MPS) hardware is an electrical/electronic
product, therefore, it must be disposed of in a acceptable manner at the end of its useful life.
This is important in order to reduce pollution and improve resource efficiency.
NOTE: At the end of its useful life, a VM600
Mk2
/VM600-rack based monitoring system
must be disposed of in an environmentally friendly manner.
In European Union Member States, the WEEE directive is applicable.
In other countries and regions of the world, different laws and regulations may be
applicable, so please consult your local authorities.
NOTE: For further information, refer to a VM600 machinery protection system (MPS)
hardware manual or contact us (see 5.1 Contacting us).

Meggitt vibro-meter VM600 Specifications

General

Brand	Meggitt
Model	vibro-meter VM600
Category	Protection Device
Language	English