Document reference MAVM600MK2MPS-QS/E QUICK START MANUAL
Edition 2 - February 2021 VM600
Mk2
machinery protection system (MPS)
ix
SAFETY
Symbols and styles used in this manual
The following symbols are used in this manual where appropriate:
NOTE: This is an example of the NOTE paragraph style. This draws the operator’s
attention to complementary information or advice relating to the subject being
treated.
The WARNING safety symbol
T
HIS INTRODUCES DIRECTIVES, PROCEDURES OR PRECAUTIONARY MEASURES WHICH
MUST
BE EXECUTED OR FOLLOWED. FAILURE TO OBEY A WARNING MIGHT RESULT IN
INJURY
TO THE OPERATOR AND/OR THIRD PARTIES, AND/OR RESULT IN DAMAGE TO
EQUIPMENT
.
The CAUTION safety symbol
This draws the operator's attention to information, directives or procedures
which must be executed or followed. Failure to obey a caution can result in
damage to equipment.
The ELECTROSTATIC SENSITIVE DEVICE symbol
This indicates that the device or system being handled can be damaged by
electrostatic discharges. See Handling precautions for electrostatic
sensitive devices on page xii for further information.
Direct current Signal 0 V (ground) terminal
Alternating current Class II equipment
Direct and alternating current Caution, general danger
Earth (ground) terminal
Caution, possibility of electric
shock
Protective conductor (ground)
terminal
Caution, hot surface
Frame or chassis (ground)
terminal
To Next Page
Loading...
Need help?
General