Meggitt vibro-meter VM600 Quick Start Manual

QUICK START MANUAL Document reference MAVM600MK2MPS-QS/E
VM600
Mk2
machinery protection system (MPS) Edition 2 - February 2021
3-8
Common VibroSight System Manager tasks
OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION SYSTEM (MPS) SOFTWARE
3.3.6.1 Notes on changing the firmware for a MPC4
Mk2
module
In order to change/upgrade the Operational (Machinery protection) firmware, the MPC4
Mk2
module must be running either the Operational firmware (Unlocked (maintenance operating
mode) only), Recovery firmware or the Proof test firmware.
In order to change/upgrade the Recovery firmware, the MPC4
Mk2
module must be running
the Operational firmware (Unlocked (maintenance operating mode) only).
In order to change/upgrade the Proof test firmware, the MPC4
Mk2
module must be running
the Recovery firmware.
See Table 4-1 for a description of the different MPC4
Mk2
module firmware and the part
numbers (PNRs) used to identify them.

Meggitt vibro-meter VM600 Specifications

General

Brand	Meggitt
Model	vibro-meter VM600
Category	Protection Device
Language	English