Meggitt vibro-meter VM600 Quick Start Manual

Document reference MAVM600MK2MPS-QS/E QUICK START MANUAL
Edition 2 - February 2021 VM600
Mk2
machinery protection system (MPS)
2-13
MPC4
Mk2
machinery protection and condition monitoring module
OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION SYSTEM (MPS) HARDWARE
It is important to consider a MPC4
Mk2
module’s LAN (Ethernet) port settings when connecting
a MPC4
Mk2
module to a computer/network for the first time and/or when reconfiguring or
replacing a module in an application.
Using VibroSight System Manager, the Ethernet port settings for a MPC4
Mk2
module can be
changed as required using the IP settings command. For example, to use static addressing
instead of dynamic addressing (that is, to use fixed IP addresses).
See 3.3.1 Configuring the network interface for a MPC4
Mk2
module.

Meggitt vibro-meter VM600 Specifications

General

Brand	Meggitt
Model	vibro-meter VM600
Category	Protection Device
Language	English