Meggitt vibro-meter VM600 - Page 61

Document reference MAVM600MK2MPS-QS/E QUICK START MANUAL
Edition 2 - February 2021 VM600
Mk2
machinery protection system (MPS)
2-21
IOC4
Mk2
input/output module
OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION SYSTEM (MPS) HARDWARE
2.3.2 IOC4
Mk2
module factory assigned defaults
2.3.2.1 IOC4
Mk2
module as part of a VM600
Mk2
solution
For an IOC4
Mk2
module delivered as part of a VM600
Mk2
solution, the IOC4
Mk2
module’s
hardware jumpers are normally pre-configured in the factory for the application before
delivery of the system.
2.3.2.2 IOC4
Mk2
module as a spare part
For an IOC4
Mk2
module delivered as a spare part, the IOC4
Mk2
module is not pre-configured
for the application before delivery.
Accordingly, for an IOC4
Mk2
module delivered as a spare part, the end-user/operator must
configure the IOC4
Mk2
module’s hardware jumpers as required for the application
(see 1.9 Hardware configuration).