Memmert ICO - Timer operation

D33451 | Date 01/2018 29
Operation and control
CO
2
Adjustment range: 0 to 20 % in steps of 0.1 %
CO2
1.0 %
15.0 % Set
The number 1 or 2 displayed in the gas bottle symbol indicates
which gas bottle is currently active.
1 2
O
2
(only for corresponding model)
Adjustment range: 1 % to 20 % in steps of 0.1 %
O2
1.0 %
10.0 % Set
5.5.5 Operation with digital backwards counter with target time setting,
adjustable from 1 minute to 99 days ( timer)
In timer operation, you can adjust the time the appliance runs at the set values. The appliance
has to be in manual operating mode for this.
1. Press the activation key to the left of
the timer display. The timer display is
activated.
TIMER
-
Ende
9:00 23.11.
--h- m
2. Turn the turn control until the desired
duration is displayed – in this example 4
hours 30 minutes. The approximate end
time is shown beneath, in a smaller font.
TIMER
End
0
13:30 23.11.
04 mh 3
Up to a duration of 23 hours 59 minutes, the time is displayed in hh:mm (hours:minutes)
format. For 24 hours and more, the format dd:hh (days:hours) is used. The maximum
duration adjustable is 99 days 00 hours.
3. Press the confirmation key to confirm.
The display now shows the remaining time
in a large font and the approximate end time
in a smaller font beneath. The status display
shows
Timer active.
TIMER
30m04h
End
13:30 23.11.
Timer active
12.Sept.2012
13:44