NON-BIGFOOT GEAR HOUSING
Page 6A-3590-828631R3 MARCH 1999
11. Bearing carrier O-ring should be inspected for cuts and abrasions.
NOTE: It is a good repair procedure to replace all O-rings and seals regardless of appear-
ance.
12. Apply 2-4-C w/Teflon to O.D. of bearing carrier and also to O-ring. Install O-ring onto
bearing carrier.
13. Using suitable mandrel, press reverse gear assembly into carrier.
52827
95
95
2-4-C w/Teflon (92-850736A1)
b
c
a
a-O-ring
b-Mandrel (3/4 in. Socket)
c-Reverse Gear Assembly
To Next Page
Loading...
