EasyManuals Logo

Mercury MerCruiser D2.8L D-Tronic User Manual

Mercury MerCruiser D2.8L D-Tronic
878 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #325 background imageLoading...
Page #325 background image
ENGINE MECHANICAL
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 3A-125
MAIN BEARINGS (MEASUREMENT)
1. Inspect bearings. Refer to Examples of Bearing Failures.
2. To check clearance of center main bearings:
a. Install bearings in original carrier halves, if removed.
b. Observing marks made earlier, assemble carriers. Torque bolts with washers to
42 Nm (31 lb-ft).
c. Measure inner diameter of bearing as shown.
70310
Measuring Inner Diameter Of Bearing
d. Measure outer diameter of matching crankshaft journal as shown.
70311
Measuring Outer Diameter Of Journal
e. Calculate difference between measurement taken in step c. and d. (clearance) and
refer to specifications for maximum clearance of bearing being checked.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury MerCruiser D2.8L D-Tronic and is the answer not in the manual?

Mercury MerCruiser D2.8L D-Tronic Specifications

General IconGeneral
BrandMercury
ModelMerCruiser D2.8L D-Tronic
CategoryEngine
LanguageEnglish

Related product manuals