Mercury Zeus - Section 5 - Maintenance; Propellers; Propeller Installation

Section 5 - Maintenance
Page 118 90-879172181 eng FEBRUARY 2011
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft splines 92-802867Q 1
24029
Lubricating the propeller shaft splines
2. Slide the front thrust hub onto the propeller shaft with the tapered side toward the propeller hub.
3. Align the splines and place the front propeller on the propeller shaft. The propeller must fit freely on the propeller shaft splines.
4. Install the front propeller nut.
a - Front propeller
b - Nut
5. Place a block of wood between the trim tab and the propeller.
6. Torque the front propeller nut using the propeller nut tool.
a - Block of wood
b - Trim tab
c - Propeller nut tool
a
b
24031
b
a
c
24035