Section 2 - Getting to Know Your Power Package
90-879172181 eng FEBRUARY 2011 Page 13
The E‑stop switches must be maintained and tested at a specified interval. Refer to Maintenance Schedules—Routine
Maintenance.
Instrumentation
VesselView
VesselView is the primary source of information for the Zeus drive.
• Engine information
• Fault codes
• Tank levels
• Boat direction
VesselView
Applications may have more than one VesselView.
For more information, refer to the VesselView Operators Manual.
SmartCraft Speedometer and Tachometer Digital Gauges (If Equipped)
The Cummins MerCruiser Diesel SmartCraft instrument package augments the information provided by VesselView. The
instrument package may display:
• Engine RPM
• Boat speed
• Coolant temperature
• Oil pressure
• Battery voltage
• Fuel consumption
• Engine operating hours
• And more
Typical SmartCraft tachometer (speedometer similar)
To Next Page
Loading...
Need help?
General
