Mercusys AC1200 User Manual

AC12G
AC1200 Wireless Dual Band Gigabit Router
• Primary DNS - (Optional.) Enter the DNS IP address provided by your ISP or consult your
ISP.
• Secondary DNS - (Optional.) Enter the IP address of another DNS server if your ISP
provides two DNS servers.
Click Save to make the settings effective.
• Host - The name of the DHCP Equipment
• MAC Address - The MAC address of the DHCP client
• IP Address - The IP address that the router has allocated to the DHCP client
• Effective Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.
Click Refresh to show the current attached devices.
5.1.7 IP & MAC Binding
Go to Network→IP & MAC Binding, you can control access of a specific computer in the LAN
by binding the IP address and the MAC address of the device together.
• Host - The name of the computer in the LAN.
• MAC Address - The MAC address of the computer in the LAN.
• IP Address - The assigned IP address of the computer in the LAN.
• Status - Displays whether the MAC and IP address are bound or not.
NOTE:
To use the DHCP server function of the router, you must configure all computers on the LAN
as Obtain an IP Address automatically.
- 30 -

Mercusys AC1200 Specifications

General

Power Supply	9V/0.85A
Wireless Standards	IEEE 802.11ac/n/a 5 GHz, IEEE 802.11n/b/g 2.4 GHz
Frequency	2.4 GHz and 5 GHz
Signal Rate	300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz
Ports	1 x 10/100 Mbps WAN port, 4 x 10/100 Mbps LAN ports
Antenna	4 x fixed antennas
Button	Reset
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK
Dimensions	222 x 140 x 32 mm