EasyManuals Logo

Mercusys AC1200 User Manual

Mercusys AC1200
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
AC12G
AC1200 Wireless Dual Band Gigabit Router
Gateway - The default IPv6 gateway for the router's WAN interface.
Manually set DNS server - The DNS addresses will be automatically assigned to the
router. You can also set manually according to your needs.
Primary/Secondary DNS - Enter the primary/Secondary IPv6 DNS server address
provided by your ISP.
Enable Prefix Delegation - Select to get a prefix delegation by DHCPv6 server from the
ISP. Clients in LAN will generate an IPv6 address with this prefix.
Click Save to make the settings effective.
5.1.4 IPTV
Go to NetworkIPTV, you can configure IPTV setup to enable IPTV service provided by your
ISP.
To configure IPTV, follow the steps below.
1. Select the appropriate mode according to your ISP.
Select Bridge if your ISP is not listed and no other parameters are required.
Select Custom if your ISP is not listed but provides necessary parameters.
2. After you have selected a mode, the necessary parameters, including the LAN port for
IPTV connection, are predetermined.
3. Click Save.
4. Connect the set-top box to the corresponding LAN port which is predetermined or you
have specified.
- 27 -

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercusys AC1200 and is the answer not in the manual?

Mercusys AC1200 Specifications

General IconGeneral
Power Supply9V/0.85A
Wireless StandardsIEEE 802.11ac/n/a 5 GHz, IEEE 802.11n/b/g 2.4 GHz
Frequency2.4 GHz and 5 GHz
Signal Rate300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz
Ports1 x 10/100 Mbps WAN port, 4 x 10/100 Mbps LAN ports
Antenna4 x fixed antennas
ButtonReset
Wireless SecurityWPA/WPA2, WPA-PSK/WPA2-PSK
Dimensions222 x 140 x 32 mm

Related product manuals