AC1200 Wireless Dual Band Gigabit Router
5.5 Advanced Users
There are six submenus under the Forwarding menu: Virtual Server, DMZ Server, UPnP
Settings, Advanced Routing, Dynamic DNS and NAT Boost. Click any of them, and you will be
able to configure the corresponding function.
5.5.1 Virtual Server
Go to Advanced Users→Virtual Server, and then you can view and add virtual server on the
page. Virtual server can be used for setting up public services on your LAN.
• Common Server - Some common services already exist in the drop-down list.
• External Port - The numbers of External Service Ports. You can enter a service port or a
range of service ports (the format is XXX - YYY; XXX is the Start port and YYY is the End
port).
• Internal Port - The Internal Service Port number of the PC running the service application.
You can leave it blank if the Internal Port is the same as the External Port, or enter a
specific port number when External Port is a single one.
• IP Address - The IP address of the PC running the service application.
• Protocol - The protocol used for this application, either All (all protocols supported by the
router), TCP or UDP.
• Edit - Here you can edit an existing entry.
• Add - Click to add a new rule entry.
- 41 -
To Next Page
Loading...
Need help?
General
