Mercusys AC1200 User Manual

AC12G
AC1200 Wireless Dual Band Gigabit Router
● System Routing List
• Destination Address - The address of the network or host to which the static route is
assigned.
• Subnet Mask - The subnet mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
• Next Hop - The IP address of the gateway device that allows for contact between the
router and the network or host.
• Port - Displays either the Destination IP Address is on the LAN/WLAN or on the WAN.
5.5.5 Dynamic DNS
Go to Advanced Users→Dynamic DNS, and you can configure the Dynamic DNS function.
• Service Provider - The Dynamic DNS service provider.
• Dynamic DNS Client – Select to enable or disable dynamic DNS client.
• Username/Password - Enter the username and password of your DDNS account.
• Domain Name - Enter the domain name provided by the DDNS service provider.
To set up for Dynamic DNS, follow these steps:
- 45 -

Mercusys AC1200 Specifications

General

Power Supply	9V/0.85A
Wireless Standards	IEEE 802.11ac/n/a 5 GHz, IEEE 802.11n/b/g 2.4 GHz
Frequency	2.4 GHz and 5 GHz
Signal Rate	300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz
Ports	1 x 10/100 Mbps WAN port, 4 x 10/100 Mbps LAN ports
Antenna	4 x fixed antennas
Button	Reset
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK
Dimensions	222 x 140 x 32 mm