Mercusys AC1200 User Manual

AC12G
AC1200 Wireless Dual Band Gigabit Router
1. Select your service provider from the drop-down list.
2. Enable the Dynamic DNS client.
3. Enter the username and password of your DDNS account. If you do not have an account,
click Go to register… to register an account.
4. Enter domain name you registered with the Dynamic DNS service provider.
5. Click Save.
5.5.6 NAT Boost
Go to Advanced Users→NAT Boost, and you can configure the NAT Boost function.
NAT Boost - Click to enable or disable this function. It is recommended to enable NAT Boost to
ensure that your router has the best throughput.
5.6 System Tools
There are eight submenus under the System Tools menu: Web Management, Time Settings,
Firmware Upgrade, Backup & Restore, Reboot, Change Login Password, Diagnostic Tools
and System Log. Click any of them to configure the corresponding function.
5.6.1 Web Management
Go to System Tools→Web Management, and then you can configure the management rule on
the page.
- 46 -

Mercusys AC1200 Specifications

General

Power Supply	9V/0.85A
Wireless Standards	IEEE 802.11ac/n/a 5 GHz, IEEE 802.11n/b/g 2.4 GHz
Frequency	2.4 GHz and 5 GHz
Signal Rate	300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz
Ports	1 x 10/100 Mbps WAN port, 4 x 10/100 Mbps LAN ports
Antenna	4 x fixed antennas
Button	Reset
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK
Dimensions	222 x 140 x 32 mm