AC1200 Wireless Dual Band Gigabit Router
• Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to
a given host or gateway.
• Tracert - This diagnostic tool tests the performance of a connection.
• IP Address/Domain Name - Enter the IP address or domain name of the PC whose
connection you wish to diagnose.
• Pings Packet Number - Specifies the number of Echo Request messages sent. The
default is 4.
• Ping Packet Size - Specifies the number of data bytes to be sent. The default is 64.
• Ping Timeout - Time to wait for a response, in milliseconds. The default is 800.
• Tracert Max Hops - Set the maximum number of hops (max TTL to be reached) in the path
NOTE:
You can use ping/tracert to test numeric IP address or domain name. If pinging/tracerting
the IP address is successful, but pinging/tracerouting the domain name is not, you might
have a name resolution problem. In this case, ensure that the specifi
ed domain name can be
resolved by using Domain Name System (DNS) queries.
- 53 -
To Next Page
Loading...
