1 Introduction
761 Compact IC
2
The operation of the 761 Compact IC takes place via a PC connected
to the RS232 interface with the help of the control and evaluation pro-
gram «761 Compact IC». This PC program can be used to create sys-
tems for recording and evaluating chromatograms. Time programs can
also be created in which a large number of instrument functions can be
triggered for each program step. It is also possible to use programma-
ble signals to control external instruments such as the 750 Autosampler
or the 766 IC Sample Processor via the remote interface.
About 80 prepared system configurations for more than 300 applica-
tions are already permanently stored and additional new applications
can be downloaded at any time from the Internet under
«www.metrohm.ch».
The operating software for the 761 Compact IC meets all the require-
ments you could place today on a modern integration software: single
or multi-point calibration, internal or external standard, selectable algo-
rithms for non-linear calibration, various integration modes with integra-
tion parameters and integration events, different methods for peak rec-
ognition, peak editor, free scaling, superimposing several
chromatograms, use of sample tables and batch reprocessing; a pow-
erful and GLP-conform report generator with output interfaces for moni-
tor, printer and external databases.
The independent «Autodatabase» PC programm supplied can be used
to save and handle results and chromatograms produced by the «761
Compact IC» program in a database. With «Autodatabase», data can
be sorted, filtered and searched with the help of different criteria. In ad-
dition, data and curves can be printed out according to user-defined
report templates.
To Next Page
Loading...
Need help?
General
