Metrohm 761 Compact IC - Overview of File Types

4.1 Fundamentals of the operation
761 Compact IC
71
Enable/disable peak editor mode
View whole chromatogram
Help
Lock system
Connected system
4.1.6 Overview of file types
The following file types are produced by the «761 Compact IC» soft-
ware:
*.bar Batch reprocessing file
This binary file contains data of the batch reprocessing
queue. The
*.bar file is stored automatically in the Data
folder.
*.cal Calibration file
This binary file contains calibration data, which can be ex-
ported with
761 COMPACT IC / Method / Calibration / Export
calibration
. The *.cal file is stored automatically in the Meth-
ods
folder.
*.chw Chromatogram file
This binary file contains chromatogram, system and
method data of a determination. The
*.chw file is stored
automatically in the
Data folder.
*.mtw Method
This binary file contains the data acquisition method, which
can be linked to a system. The
*.mtw file is stored automati-
cally in the
Methods folder.
*.que Sample queue file
This binary file contains sample table queue. The
*.que file
is stored automatically in the
Methods folder.
*.rtt Report template
This ASCII file contains a report template. The
*.rtt file is
stored in the program folder.
*.smt System file
This ASCII file contains the system settings. The
*.stm file is
stored automatically in the
Systems folder.
*.dev Device file
This ASCII file contains drivers for devices. The
*.dev file is
stored in the
Devices folder.