Metrohm 761 Compact IC - Sample Queue; Sample Queue File Handling; Open Sample Queue; Save Sample Queue

4 Operation
761 Compact IC
156
4.6 Sample queue
A sample queue is a table containing sample-specific data which is
used to facilitate work with autosamplers and multiple analyses. The
number of rows of the sample queue table defines the number of de-
terminations which are run automatically. Once the queue has been
started, the sample-specific data are transferred line-by-line to the run-
ning determination overwriting the corresponding fields of the method.
A sample queue is stored in a sample queue file
*.que in a subfolder of
the
Methods directory.
4.6.1 Sample queue file handling
Open sample queue
761 COMPACT IC / File / Open / Sample queue
SYSTEM / System / Sample queue
These two menu items open the OPEN window for opening an existing
sample queue file
*.que or creation of a new sample queue file *.que by
entering a new name. After confirmation with
<OK> the sample queue
overview table is opened (see section 4.6.2).
Save sample queue
QUEUE EDITOR / File / Save
Save the sample queue table in a sample queue file (*.que) in the work-
ing directory. The sample queue editor window remains open.
QUEUE EDITOR / File / Save & exit
Save the sample queue table in a sample queue file (*.que) in the work-
ing directory and close the sample queue editor window.
SAMPLE QUEUE OVERVIEW / File / Save as
Save a copy of the current sample queue into a new sample queue file
(
*.que) in the working directory.
Delete sample queue
SAMPLE QUEUE OVERVIEW / File / Delete
Close the sample queue overview window and delete the sample queue
file (
*.que).