Metrotech Corp. | 1
Metrotech Copyright © 2008 Doc. No.: R12015
1
Introduction and Safety
1.1 INTRODUCTION
The Metrotech Model i5000™ MetroMark™ is a series of state-of-the-art utility line locators precisely designed
with many powerful features to provide you with optimum information about your locate situation.
Included are a system overview, product specications, quick start procedure for experienced users, and mainte-
nance instructions.
1.2 GENERAL INFORMATION AND SAFETY
Symbols used
in this manual
Important instructions concerning the protection of staff and equipment as well as technical
safety within this document are labeled with one of the following symbols:
Symbol Description
WARNING
Indicates a potentially hazardous situation,which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury or material damage.
NOTE
Notes have important information and useful tips on the operation of your
equipment. Nonobservance may result in incorrect measurement results.
Operating
personnel
Metrotech utility line and marker locators are intended for use by utility
and contractor professionals. Safety hazards for underground utility
access areas include electrical shock, explosive gases, and toxic fumes
as well as potential inuence on communications and control systems
such as trafc control and railroad crossings.
Repair and
maintenance
Repairs and service must only be done by Metrotech Corporation or
authorized service departments of Metrotech Corporation.
1.3 SAFETY PRECAUTIONS
This manual contains basic advice for the installation and operation of Metrotech Utility Line and Marker Locators
and accessories. The manufacturer is not liable for damage to material or humans due to non-observance of the
instructions and safety advice provided in this manual. Therefore, this manual should be provided and reviewed
by all personnel associated with the line locating equipment.
To Next Page
Loading...
