Metrotech MetroMark i5000 Series User Manual

Metrotech Corp. | 45
Metrotech Copyright © 2008 Doc. No.: R12015
6.2.6.2 Data Log
Log Memory displays the total Log Memory, Memory Used, and Number of Log Entries. Use the 4-way navigation
button to highlight Log Memory and press the <Select> softkey to display the log data statistics.
Figure 6-49 Log Memory Selection in Data Log Menu
6.2.6.2.1 Data Log Memory
The Data Log Memory screen lists the status of the i5000 MetroMark receiver memory. Press the <Back> softkey
to return to the previous interface.
Figure 6-50 Data Log Memory in Data Logging Menu
6.2.6.2.2 Data Log Pictures
Selecting Pictures displays the name and size of all Locate Images in memory. Images are recorded in chrono-
logical order. No viewing capability is currently available on the receiver LCD. Images can be uploaded, however,
to the MyLocator web service and viewed. Press the <Back> softkey to return to the previous interface.
To log a picture into the receiver memory, a Bluetooth-ready camera must be ON and ready for transmission. The
i5000 MetroMark receiver must also be set on discoverable prior to transferring the image. The captured image
can then be transmitted through the camera’s send function. The receiver’s blue LED will emit conrming that the
Bluetooth connection is active.
Figure 6-51 Pictures in Data Logging Menu

Metrotech MetroMark i5000 Series Specifications

General

Brand	Metrotech
Model	MetroMark i5000 Series
Category	Measuring Instruments
Language	English