46 | i5000™ MetroMark™ Manual
Doc. No.: R12015 Metrotech Copyright © 2008
6.2.6.3 Record Mode
Record Mode allows the user to select the data logging format. Two choices are available for selection - on
Depth or on Depth + Timer. Check with your supervisor what record mode should be used.
Figure 6-52 Record Mode in Data Logging Menu
6.2.6.4 Marker Read History
The marker read history provides a data log of RFID recorded serial numbers.
Figure 6-53 Marker Read History in Data Logging Menu
The collected data include the date, marker type, and serial number of each marker that is successfully read. The
data log information will be stored in the receiver’s memory until the unit is synchronized with MyLocator.
Figure 6-54 Marker Read History Log in Data Logging
To Next Page
Loading...
Need help?
General
