14 | i5000™ MetroMark™ Manual
Doc. No.: R12015 Metrotech Copyright © 2008
Part Accessory Description
8” Clamp 8” (200mm) inductive coupler. The inductive coupler
can be used at 9.8kHz or 82kHz.
Soft Carrying Case
Hard or soft nylon case equipped to contain
one transmitter, one receiver, and accessories.
Transmitter Battery,
Rechargeable
Rechargeable Li-ion battery pack
Transmitter Battery
Holder, Alkaline
6 D-cell alkaline battery holder
Receiver Battery,
Rechargeable
Rechargeable Li-ion battery pack
Receiver Battery
Holder, Alkaline
9 AA-cell alkaline battery holder
A Frame
Standalone A frame for pinpointing sheath faults.
Conductive Attach-
ment Kit
Conductive attachment kit includes conductive leads
for direct connection, ground rod, and carrying case.
Ground Rod
Earth ground rod
Sondes
Small, large, and exi-sondes available in different op-
erating frequencies – 982Hz, 9.8KHz, 35KHz, 82KHz,
83KHz
RS232 communica-
tion kit
DB-9 RS232 null modem cable and RS2323 receiver
adapter for data transfer and software updating
AC Charger Kit
Charging cable for the transmitter and receiver
12 VDC Automobile
Charger
Charging cable for the transmitter and receiver
To Next Page
Loading...
