11
MicroEn
ine
XP-GT/GTR Programming Manual
v4.00
XP-GT/GTR (1500L, 3500L, 1500ABL, 3500ABL) Series
To enter Configuration Menu for the first time, please follow the steps below:
1. Press '*' (asterisk).
2. Enter the 6-digits default Master PIN (“123456”).
3. Screen as below will be shown. Enter a new 6-digit Master Pin for enhanced
security levels.
4. Screen as below will be shown. Re-enter the same, new 6-digit Master Pin.
5. To enter Configuration Menu from here onwards, press the ‘*’ (asterisk) key
followed by the new 6-digit Master Pin entered earlier.
6. To change the Master Pin, please refer to Section 4.1 Change Master Pin.
Upon entering Configuration Menu, users will be able to see menu layout as shown in
page 12.
Chan
e MasterPIN
Enter New Master Pin
Pin: [------]
√ - OK
X - Cancel
Change MasterPIN
Re-Enter Master Pin
Pin: [------]
√ - OK
X - Cancel
To Next Page
Loading...