Microengine XP-GT Series - Clear Transaction; Test Watchdog



47

MicroEn
g
ine
®

XP-GT/GTR Programming Manual
v4.00
4.2 Clear Transaction
Clear Transaction lets users clear the entire transaction record in the controller.
To clear the transaction record, please follow the steps below:
1. Enter Configuration Menu.
2. Press 4 for Maintenance Menu.
3. Press 2 for Clear Transaction. Screen as below will be shown. Press
√ to
proceed to clear all transactions in the controller.
Clear Transaction
Confirm to Clear
All Transactions?
Press √ to proceed.
√ - OK X - Cancel
4. The transaction database will be cleared.
4.3 Test Watchdog
The test watchdog function is used to test whether the internal watchdog is in good
condition, to ensure that the controller is able to exit from any latched scenario.
To test Watchdog, please follow steps below:
1. Enter Programming.
2. Press 4 for Maintenance Menu.
3. Press 3 for Test Watchdog. Screen as below will be shown:
Test Watchdog
Confirm to Test
Watchdog?
Press √ to proceed.
√ - OK X – Cancel
4. Press the √ key to proceed with the test. The screen below will be shown. To
cancel, just press the ' X ' key.
Test Watchdog
Please wait for
Controller to Reset....
√ - OK
X - Cancel