Microengine XP-GT Series - Clear All User



40

MicroEn
g
ine
®

XP-GT/GTR Programming Manual
v4.00
4. Screen as below will be shown when the controller is clearing all card lockout
statuses. A success notification will be shown once the card lockout statuses
is cleared.
Clear Card LockOut
Clearing All User
Card LockOut....
√ - OK X - Cancel
2.7 Clear All User
The Clear All User menu allows users to delete all records in the user database.
CAUTION:- This process is irreversible. Proceed only if users confirm to
remove data of all users.
To clear all user data, please follow steps below:
1. Enter Configuration Menu.
2. Press 2 for Database Menu.
3. Press 7 for Clear All User. The screen below will be shown. Press
√ to
proceed to clear all users.
Clear All User
Delete All Users?
Press √ to proceed.
√ - OK X - Cancel
4. Screen as below will be shown when the controller is clearing all users. A
success notification will be shown once all users are cleared.
Clear All User
Deleting Entire User
Database....
√ - OK X – Cancel