Microengine XP-GT Series - Add User



34

MicroEn
g
ine
®

XP-GT/GTR Programming Manual
v4.00
5. If the ID entered has not been added before, a success notification will be
shown as below. Enter another User ID to quick add another user, or press
X
to return to Database Menu.
Quick Add User
New User
Installed
√ - OK X - Cancel
2.2 Add User
This Menu allows users to add a new user with complete information.
To add user, please follow steps below:
1. Enter Configuration Menu.
2. Press 2 for Database menu.
3. Press 2 for Add User. The screen below will be shown.
Add User
Enter User Type
User Type :[0]
Prox Card
√ - OK X - Cancel
Select the user type in this screen. The 4 available options are:
i. [0] for Prox Card
ii. [1] for ID No.
iii. [2] for Mifare (Contactless Smart Card)
iv. [3] for MyKad
Press
√ to proceed to the next screen.
4. The screen below will be shown. Enter the User ID in this screen and press
√
to proceed to the next screen.
Add User
Enter User Number
ID :[------]
√ - OK X - Cancel