Microengine XP-GT Series - Clear Anti Passback; Clear Card Lockout



39

MicroEn
g
ine
®

XP-GT/GTR Programming Manual
v4.00
2.5 Clear Anti PassBack
The Clear AntiPassBack menu lets users clear anti passback statuses for all users.
To clear anti passback statuses for all users, please follow steps below:
1. Enter Configuration Menu.
2. Press 2 for Database Menu.
3. Press 5 for Clear AntiPassBack. Screen as below will be shown. Press
√ to
proceed to clear antipassback statuses.
Clear AntiPassback
Clear AntiPassback?
Press √ to proceed
√ - OK X – Cancel
4. Screen as below will be shown when the controller is clearing all user's
antipassback statuses. A success notification will be shown once all the
antipassback statuses are cleared.
Clear AntiPassback
Clearing All User
AntiPassback....
√ - OK X – Cancel
2.6 Clear Card LockOut
The Clear CardLockOut menu lets users clear card lockout statuses for all users.
To clear card lockout for all users, please follow steps below:
1. Enter Configuration Menu.
2. Press 2 for Database Menu.
3. Press 6 for Clear Card LockOut. The screen below will be shown. Press
√ to
proceed with clearing all card lockouts.
Clear Card LockOut
Clear All Card Lockout?
Press √ to proceed.
√ - OK X - Cancel