Microtek ScanWizard Pro - The Up;Down Position Arrows

108 Microtek ScanWizard Pro for Windows
The Up/Down Position Arrows
The Up/Down position arrows allow you to change the sequence in which jobs
are scanned through changing the order of the scan jobs in the Title area.
To use the Up/Down position arrows:
1. In the Title area of the Scan Job window, select the scan job to be moved up
or down.
2. Click on the Up or Down arrow to change the order of the scan job in the
list. When you start scanning, the scan jobs will be processed and scanned
in the order that they appear in the Scan Job window (i.e., the first scan job
is scanned first; the second scan job is scanned second, etc.).