Kodak Color Management System B-11
U.S. CMYK SWOP PRINTING STANDARDS:
Filename Profile Description GCR Maximum TAC
gncmyk02.icm Light GCR 260 UCR CMYK Light 260%
US Negative Proofing
gncmyk04.icm Light GCR 280 UCR CMYK Light 280%
US Negative Proofing
gncmyk08.icm Light GCR 320 UCR CMYK Light 320%
US Negative Proofing
gncmyk10.icm Light GCR 340 UCR CMYK Light 340%
US Negative Proofing
gncmyk14.icm Medium GCR 280 UCR CMYK Medium 280%
US Negative Proofing
gncmyk18.icm Medium GCR 320 UCR CMYK Medium 320%
US Negative Proofing
gncmyk28.icm Heavy GCR 320 UCR CMYK Heavy 320%
US Negative Proofing
gncmyk50.icm Light GCR 360 UCR CMYK Light 360%
US Negative Proofing
JAPANESE PRINTING STANDARDS:
Filename Profile Description GCR Maximum TAC
jpcmyk02.icm Light GCR 260 UCR CMYK Light 260%
Japan Std. Proofing
jpcmyk04.icm Light GCR 280 UCR CMYK Light 280%
Japan Std. Proofing
jpcmyk06.icm Light GCR 300 UCR CMYK Light 300%
Japan Std. Proofing
jpcmyk08.icm Light GCR 320 UCR CMYK Light 320%
Japan Std. Proofing
jpcmyk10.icm Light GCR 340 UCR CMYK Light 340%
Japan Std. Proofing
jpcmyk50.icm Light GCR 360 UCR CMYK Light 360%
Japan Std. Proofing
You read these settings as follows:
◆ All TAC percentages have the maximum degree of UCR in order to attain the highest
density blacks within that TAC limit.
◆ A Light GCR means a small percentage of the possible gray component is replaced
with black.
To Next Page
Loading...