Photoshop 5.0 Color Settings C-3
3. Click on the Load button to select the matched monitor ICC profile.
Note: Use a duplicate copy instead of the original profile to calibrate your monitor
because Adobe Gamma utility will overwrite the original profile contents with
Adobe profile contents when it is saved (as it does not allow user to save as another
profile). The original profile (e.g. Kodak’s ICC profiles used in ScanWizard Pro)
which may contain some proprietary profile information that benefits the original
CMM to reproduce more accurate color. Therefore, we highly recommend to
duplicate a copy of the profile in C:\Windows\System\Color folder that you’re going
to use for calibrating your monitor.
In the following example, select “Copy of P22G18M7.ICM*” — a duplicate
of P22G18M7.ICM” which represents “Generic P22 1.8 Gamma” monitor.
*The file “Copy of P22G18M7.ICM” is generated by first select
P22G18M7.ICM from this dialog box. Press Ctrl+C to copy, then press
Ctrl+V to paste.
To Next Page
Loading...
Need help?
General
