15
Preferences / Default Command
A new Default command has been added to the Preferences menu, allowing users to reset selected
preferences to factory defaults and to recover the original values. As default, all checked boxes are checked,
except for the All check box. The following options are available as general guidelines, where (x) indicates
that a checkbox is checked for that particular preference. Please take note, however, that the default values
may vary depending on the scanner model.
Preference Default Value
Color Space • Advanced (Native)
White & Black Points Setup • Auto Clipping: 0.01% and 0.01%
• Output Levels: 0% and 100%
• Markers: 0% and 100%
• For more details, see the White/Black Points Setup section in the Reference Manual.
CMS Setup • Embed ICC destination profile (x)
• RGB Profile: Kodak s RGB
• CMYK profile: Generic CMYK
• Auto Color Enhancement (x)
• For more details, see the Color Matching Setup section in the Reference Manual
and page 8 of this Addendum. See the next section too for additional information.
Overview Setup • Size: Maximum size
• Keep overview image after quit (x)
• Fast overview (x)
• Warn me if overwriting prescan (x)
• For more details, see the Overview Setup section in the Reference Manual.
Prescan Setup • Keep Prescan image(s) after quit (x)
• Prescan image margins: Small
• Prescan image dimension: 75% screen
• Background prescan (x)
• Completion sound: Basso
• For more details, see the Prescan Setup section in the Reference Manual.
Scan Quality • Quality
• For more details, see the More Preferences section in the Reference Manual.
Interpolation Mode • Bi-linear (Quality)
• For more details, see the More Preferences section in the Reference Manual.
Mac OS X
Windows XP
To Next Page
Loading...
Need help?
General
