25
top right corner of meter mode. Maximum quantity of PASS/FAIL parts is
999,999,999 respectively. The counting will return to 1 and continue to
accumulate when exceeding this value.
11. Multi-Step Mode Counter: Set ON/OFF of multi-step mode counter. The Select
function key can be used to make selections.
a. ON: Enable the Multi-Step Mode Counter.
b. OFF: Disable the Multi-Step Mode Counter.
※ After enabling this function, the total PASS/FAIL quantity will be displayed at the
top right corner of multi-step test mode. Maximum quantity of PASS/FAIL parts is
999,999,999 respectively. The counting will return to 1 and continue to
accumulate when exceeding this value.
12. Save Data in USB: Set whether to turn the save test data to USB flash drive function
ON/OFF under multi-step test mode.
a. OFF: Disable save test data to USB flash drive function.
b. ON: Enable save test data to USB flash drive function. The test data will be saved
on a USB flash drive after the test is completed.
※ When this function is enabled, please ensure that the USB flash drive is securely
connected to the machine.
13. Test Mode Font Size: Sets the test value font size in Multi-Step Test Mode. Use the
Select button to make the selection.
a. Large: Sets the font size as large.
b. Small: Sets the font size as small.
14. Multi-Test Fast Mode: Sets the testing method for Multi-Step Test Mode and whether
to start the fast test function. Use the Select button to make the selection.
OFF: Disables the fast test function for Multi-Step Test Mode.
ON: Enables the fast test function for Multi-Step Test Mode.
※ Multi-Test Fast Mode is only applicable to the same DUT with the same testing
conditions (voltage and frequency).
To Next Page
Loading...
