Microtest 8740 - Self-test Procedure; System Information Viewing

17
3.1.1 Self-test
This function allows the setting for whether this machine will execute the self-test function immediately
upon powering on.
(1) Press [Func]; please use [↑] or [↓] to select Self-Test and then press [Enter].
(2) The system will now execute the self-test function.
(3) The LCD screen will display as follows:
(4) Press [Exit] to exit
3.1.2 System Info.
This item allows for the viewing of the 8740 machine and version information; it lists the machine’s model
number, test pins, total space used by files, and the total remaining space, etc. And it can perform system
update.
(1) Press [Func]; please use [↑] or [↓] to select System Info and then press [Enter].
(2) The LCD screen will display as follows: