60
4.2.2 Existed Test
You can load Existed Files saved in the memory to the main memory to perform testing; instructions are as
follows:
(1) Press [File].
(2) Please use [↑] or [↓] to move the cursor to select the file name to load.
(3) After confirming, press [Enter]; the tester will start loading the selected file into the main memory
(4) At this time the LCD screen will return to the main screen and the name of the file you selected will
be displayed for current file; file loading has been completed at this time.
(5) Please press [EXIT] to exit and return to the main screen.
(6) Press [Mode] to display the test mode setting screen.
(7) Check and confirm whether the test mode settings are correct, and change according to your needs.
(8) After confirming there are no errors, press [EXIT] to exit and return to the main screen.
(9) Press [TEST] to start testing.
(10) When the test is completed or if the test needs to be interrupted, please press [EXIT] to exit.
To Next Page
Loading...
