Microtest 8740 - Basic Tester Operations

6
2.3 Basic Operations of the Tester
 Alphanumeric input Alphanumeric characters need to be inputted when saving files; the design used
for this system is EditKey. The first time it is pressed it will be the number; the
2
nd
-4
th
time will be the capital English letter from the left to the right on top of
the number buttons respectively; examples are as follows:
Button
name
Number of
times
pressed
LCD
display
1
1
1

1
1
1
2
1A

1
1A
1
3
1AB
 Moving You can use [←][↑][→][↓] to move the cursor.
 Confirm [Enter] is the general confirm button.
 Test/Exit [TEST] is the start testing button and [Exit] is the exit button.