70
4.3.8 Import File
Import file imports files on the USB flash drive to the tester; its instructions are as follows:
(1) Press [SHIFT] + [File].
(2) The LCD screen will display as follows:
1. Enters the import file screen.
2. Press S1 [PROG] or S4 [SEL ALL] to select the file to import; on the other hand you can press S5
[CANCEALL] to cancel the selected files.
3. Press S1 [IMP SEL] to import the file currently selected (highlighted) using the up and down buttons;
the file will be imported whether it was selected or not. Press S3 [IMP SEL] to import the file selected
using S1 [PROG] or S4 [SEL ALL].
To Next Page
Loading...
