1
DL431 Mic Splitter
Operator Manual
Chapter 1: Introduction
The DL431 Mic Splitter is a six-unit (6U) 19” rack unit that provides 24 mic/line inputs.
Each input feeds three separate preamps, two of which have separate remote and local
gain controls, while the third has fixed gain. The two preamps with gain controls feed
separate analogue to digital (A/D) converters, which pass digital audio to the network.
Four discrete AES50 outputs supply dual redundant digital audio to front of house (FOH)
and monitor XL8 systems, and allow for easy routing to any third-party AES50 device
(for example, a recorder), via DL461 routers.
Two balanced analogue splits - sourced from post-each mic amp - are provided on the
rear panel. The third, fixed gain, preamp feeds a transformer isolated split on the front
panel for recording or broadcast applications.
Front panel control and local monitoring, including integral headphone amplifier,
enhance the DL431’s features, and dual redundant internal power supplies ensure
worry-free operation. Four DL431s are supplied with each XL8 system to provide 96
input channels.
Your DL431 Mic Splitter was conceived by Midas to offer audio professionals
high-performance audio equipment, designed to provide no-compromise sonic quality
with a feature set that offers all essential facilities and functions. It represents the very
best of British design and engineering combined with contemporary, efficient
manufacturing methods, and will give you many years of reliable service.
So, to obtain the best results with a minimum of effort, please read this operator
manual and, finally, enjoy your Midas DL431 Mic Splitter!
Warranty and registration
Midas has total confidence in the quality and reliability of this product. To back this up,
this product comes with the standard Midas and Klark Teknik three year warranty.
Please take the time to register your product by completing and returning the
registration card or registering on our website at www.midasconsoles.com.
To Next Page
Loading...