VetPro DC Installation/Service Manual, 00-02-1606, Revision R01
4
Safe Installation and Operation
The equipment must be installed and operated only in accordance with the safety procedures and
operating instructions in this manual and in the Installation Guide and only for the purposes and
applications for which it was designed. Modifications or additions to the equipment may be made only
by Midmark Corporation or by third parties expressly authorized by Midmark Corporation. Such changes
must comply with the rules and legal requirements of the authority having jurisdiction. It is the
responsibility of the owner to ensure that existing legal regulations regarding installation of the
equipment with respect to the building are observed.
X-Ray Protection
X-ray equipment can cause injury if used improperly.
Do not operate the device in the significant zone of occupancy. The operator of an intraoral dental X-ray
device must remain 2 meters (6.6 feet) away from the focal spot and out of the path of the X-ray beam.
Do not operate the device in the significant zone of occupancy. The operator of an intraoral dental X-ray
device must remain 2 meters (6.6 feet) away from the focal spot and out of the path of the X-ray beam.
The VetPro DC system provides a high degree of protection from unnecessary X-ray radiation. However,
no practical design can provide complete protection from radiation or completely prevent operators from
exposing themselves or others to unnecessary radiation.
Responsibilities of the Installer and Service Engineer
Verification of machine performance after installation
See the “System Function Checklist” on page 55.
Verification of machine performance after maintenance or repair
See the “System Function Checklist” and the calibration instructions on page 55.
To Next Page
Loading...