Midmark VetPro - Adjusting the Display

VetPro DC Installation/Service Manual, 00-02-1606, Revision R01
71
Adjusting the Display
The VetPro DC Animal Health Dental X-ray System allows the operator to
adjust the display image.
1. From the Main System Configuration menu, Figure 54, select ADJUST
DISPLAY. You will see the Display Options menu shown in Figure 55.
2. Selecting EXIT returns the display to the Main System Configuration
menu.
Adjusting
Contrast
1. Select ADJUST CONTRAST from the menu. You will see the Progeny
®
logo.
2. Use the up and down arrows to increase or decrease the contrast
between the menu text and the display background.
3. Press the right arrow to save your settings.
Reversing the
Image
1. Select REVERSE IMAGE from the menu. The text and display background
colors will be swapped.
2. Press the right arrow to save your settings.
Figure 55
Display Options
Menu