Miele CVA615 - Base Plate - Removal

Technical Information
45
CVA615 Coffee System
5.6 Base Plate - Removal
1. Remove the Lid, Mains and Rear Panel (5.1 to 5.3)
2. Open the door.
3. Remove the Waste Container.
4. Remove the Water Tank.
5. Check if water is present in the Drip Tray with a finger through
the opening under the water container.
6. If water is present, remove it using a suitable device.
7. Remove the Brew Unit.
8. Remove the Coffee Beans from their container.
9. Remove the Base Plate Fixing Screws.
10. Tilt the appliance onto its rear.
11. Remove the Base Plate and disconnect the ground wire.
Figure 5-6: Base Plate – Removal.