Miele CVA615 - Hot Water Nozzle - Removal; Hot Water Valve - Removal

Technical Information
56
CVA615 Coffee System
5.17 Hot Water Nozzle – Removal
Refer to figure 5-16.
1. Open the door.
2. Remove the Rear Door Panel and Fascia Panel Cover
(5.10 & 5.11).
3. Loosen the nut (2).
4. Remove the holder (5).
5. Unscrew the sleeve, (1) from the connector (6).
6. Pull out the Hot Water Nozzle (3), from the connector.
Figure 5-16: Hot Water Valve Components
5.18 Hot Water Valve (Y12) – Removal
Refer to figure 5-16.
1. Open the door.
2. Remove the Rear Door Panel and Fascia Panel Cover
(5.10 & 5.11).
3. Disconnect the electrical connection (7).
4. Loosen the Hot Water Valve Nuts.
5. Pull out the Hot Water Valve from the connector (6).
1 - Sleeve
2 - Nut
3 - Hot water nozzle
4 - Fixing screws - Holder
5 - Holder
6 - Connector
7 - Hot water valve (Y12)